bedroom development all products

White Border Photos for Instagram: Ratios, Border Widths and EXIF Frames

The short answer

A 3:2 frame from a mirrorless camera or film, a 3:4 shot from your phone, and landscapes mixed in with portraits. Post them as they are and every photo sits at a different height in the feed. On your profile grid, each one gets cropped differently.

Put a white border around each photo and fit them all into images of one ratio, and every photo shows uncropped, in a frame of the same size. If you just want the recipe, here it is. Ratios are written width:height.

  • Make the image 3:4 portrait, 1080×1440 pixels (or 4:5, 1080×1350, if your feed is already built on 4:5)
  • Leave a border of about 8% of the image width on all four sides
  • Fit the photo inside the border without changing its aspect ratio
  • If white space is left above and below the photo, make the bottom slightly deeper than the top
  • Use white, or an off-white that is slightly warmer than white

The exact pixel sizes for landscape and portrait photos are in the tables. This guide also covers EXIF frames, where you set the camera details in small type under the photo. A border makes landscape photos display smaller than they would without one, so a photo that should fill the screen is usually better without one.

This guide is written by the person who builds Easel, a Mac app that adds a border and the shooting details to your photos. Easel offers 4:5 and 1:1. It does not offer 3:4 yet.

How to add a white border

In this guide, the "image" is the finished file you post and the "photo" is your original picture. There are two ways to make one.

  • In a phone app: look for a feature called something like Border, Frame, Canvas or Padding in your editing app. Pick 3:4 or 4:5 as the ratio and set the border width with the slider. Step 6 gives percentages to aim for
  • On a computer, by the pixel: any editor that lets you place a photo on a new canvas and type in its size and position, such as Photoshop, GIMP or Affinity Photo, can build the image straight from the tables

The numbers here assume an image 1080 pixels wide. If you want a larger file for prints or other sites, scale every number by the same factor (double them for 2160 pixels).

1. Choose the image ratio

Decide the ratio of the finished image first. In May 2025, Instagram raised the tallest ratio it shows in the feed from 4:5 to 3:4.

  • 3:4 (1080×1440): the tallest a post can appear in the feed. It is the ratio your phone camera shoots when you hold it upright
  • 4:5 (1080×1350): the old maximum. If your feed is already built on 4:5, staying with it keeps the grid consistent
  • 1:1 (1080×1080): a square. The grid crops its sides, so it is a poor choice if a tidy grid is the goal

The ratio matters most for portrait photos. A 2:3 portrait comes out at 844×1266 pixels in a 3:4 image and 784×1176 in a 4:5 image. A 3:2 landscape is 906×604 pixels in every ratio; only the amount of white above and below it changes.

Since January 2025, the profile grid has shown posts as tall rectangular tiles. Instagram has not published the tile ratio, and any post wider than a tile has its sides cropped in the grid. If the tiles were 4:5, a 1:1 image would lose 108 pixels on each side, more than its 87-pixel border, so the photo itself would be cut. You can also choose, post by post, whether the grid shows the whole image or a crop.

2. Choose the border width

Set the border width as a share of the image width. A fixed number of pixels looks different as soon as you export at another size.

WidthShare of image widthBorder at 1080 pixelsLandscape photo width
Thin5%54 pixels972 pixels
Medium8%87 pixels906 pixels
Wide11%119 pixels842 pixels

A thin border leaves the photo larger, but barely shows on the small grid tiles. A wide border looks more like a framed print, at the cost of a smaller photo. Go thinner if you post mostly landscapes, and wider if you want each photo to stand on its own as a piece. If you are unsure, start with 8%, in the middle.

5%, 8% and 11% are the S, M and L border sizes in my app, Easel, not an industry standard. The pixel counts are rounded up so the border never falls below the chosen width.

3. Fit the photo inside the border

Mark out the border on all four sides of the image and fit the photo inside it. Keep the photo's aspect ratio.

Either the photo's width or its height reaches the edge of that inner area first. In the other direction, more white is left than the border width. This guide calls that the leftover space.

Put a 3:2 landscape into a 3:4 image and the width reaches the edge first, leaving a lot of space above and below. Put a 2:3 portrait in and the height reaches the edge first, leaving space at the sides. The photo sizes are in the tables.

4. Split the space above and below

When space is left above and below, make the bottom slightly deeper. We tend to see the centre of a picture as sitting a little above its true centre. So a photo with equal space above and below looks as if it has dropped. A deeper bottom is also the convention for picture-framing mats.

How much deeper is a matter of taste, and some people keep top and bottom equal. Easel takes the image height, subtracts the photo height, and splits what remains top:bottom = 1:1.2. The top never goes below the chosen border width. When the height reaches the edge first, as with a 2:3 portrait, top and bottom both stay at the border width.

5. Choose the colour

Besides pure white (#FFFFFF), there is off-white, such as #F3F0E9, with a hint of yellow. Off-white feels softer than white. When you view Instagram on a white background, a white border melts into it and is hard to see. Off-white makes the edge of the image easier to see. On a dark background (dark mode), a white border glares instead, and off-white tones that down a little. Dark photos also suit a black border.

6. Make and export the image

With the table values, there is nothing to calculate. For a 3:4 image with an 8% border and a 3:2 landscape:

  1. Create a new 1080×1440-pixel image and fill it with white
  2. Paste in the photo and scale it, with the aspect ratio locked, to 906×604 pixels
  3. Place the photo's top-left corner 87 pixels from the left and 380 pixels from the top
  4. Export as JPEG

For a 2:3 portrait, scale it to 844×1266 pixels in step 2 and place it 118 pixels from the left and 87 from the top in step 3.

If your app does not take pixel values, match the proportions instead. Scale a landscape photo until it is about 84% of the image width. For a 2:3 portrait in a 3:4 image, scale it until it is about 88% of the image height. If you cannot type in a position, centre the photo horizontally and leave a little more white below it than above.

Check two more things when you export.

  • Colour profile: the information that tells software how to read the image's colours. An image with no profile is displayed as sRGB, so an Adobe RGB or Display P3 photo that loses its profile looks washed out. The safest option is to convert to sRGB and embed the profile
  • Location (GPS): photos from cameras and phones may record where they were taken. If you will send the file to someone or post it on other sites, strip the location when you export

Pixel tables: photo size and border

These values are for an image 1080 pixels wide with an 8% border and no caption, worked out with the rules in steps 2 to 4. A 3:2 landscape is the shape of mirrorless cameras, DSLRs and 35mm film; a 4:3 landscape is the shape of phones and Micro Four Thirds. Turned upright, they become 2:3 and 3:4. Side borders are per side, and the top and bottom borders include the leftover space.

3:4 (1080×1440 pixels)

PhotoPhoto sizeSidesTopBottom
Landscape 3:2906×60487380456
Landscape 4:3906×67987346415
Portrait 2:3844×12661188787
Portrait 3:4906×120887105127

4:5 (1080×1350 pixels)

PhotoPhoto sizeSidesTopBottom
Landscape 3:2906×60487339407
Landscape 4:3906×67987305366
Portrait 2:3784×11761488787
Portrait 3:4882×1176998787

1:1 (1080×1080 pixels)

PhotoPhoto sizeSidesTopBottom
Landscape 3:2906×60487216260
Landscape 4:3906×67987182219
Portrait 2:3604×9062388787
Portrait 3:4679×906200 left, 201 right8787

For a 5% or 11% border, replace the 87-pixel border with 54 or 119 and work through the same steps. For a ratio that is not in the tables, such as 6×6 square or 16:9, fit the photo inside the area within the border. With an 8% border, that area is 906×1266 pixels in 3:4, 906×1176 in 4:5, and 906×906 in 1:1.

Adding the shooting details (EXIF frames)

A white border with the camera, lens, focal length, aperture, shutter speed and ISO set in the space below the photo is called an EXIF frame. The details come from the shooting data (EXIF) recorded in the photo file.

Your operating system can already show it.

  • iPhone: open the photo in Photos and tap the ⓘ button
  • Mac: open the photo in Preview, choose Tools > Show Inspector, and look at the EXIF tab
  • Windows: right-click the file, choose Properties, and open the Details tab

Two lines, written the same way every time

There are a lot of items, so two lines read more easily. Put the camera and lens on the first line, and the focal length, aperture, shutter speed and ISO on the second.

FUJIFILM X-T5 · XF23mmF2 R WR
23mm · f/2 · 1/500s · ISO 160

When every photo is written the same way, the grid looks tidy. Keep these consistent:

  • Separator: pick one quiet mark, such as " · ", and use it on every photo
  • Aperture: drop a trailing .0, so f/2 rather than f/2.0
  • Shutter speed: write fractions below one second (1/500s) and seconds from one second up (2s)
  • Brand name: some cameras already include the brand in the model name. Write it once, not "Canon Canon EOS R5"
  • Missing items: for a vintage lens that records no lens name, remove that item along with its separator and close the gap

Where to put the caption

There are two main ways to place it.

  • Just below the photo, at a fixed distance: the photo and the text read as one unit, whether the photo is landscape or portrait. The trade-off is that the text sits at a different height on each tile in the grid
  • At a fixed distance from the bottom of the image: the text lines up across the grid. The trade-off is that on landscape photos the text ends up far from the photo and the layout looks loose

Easel uses the first. It sets the first line 3% of the image width below the photo (about 32 pixels at 1080). The text needs room, so portrait photos come out slightly smaller than in the tables. A 2:3 portrait in 4:5 with an 8% border shrinks from 784×1176 to 736×1104 pixels.

Colour and size

Keep the text quieter than the photo. Dark grey sits more comfortably on the border than pure black. On a black border, use a light grey. Make the second line lighter than the first, and the camera and lens are read first.

Choose the size by whether people should be able to read it on a phone without zooming in. Easel's type is about 1.2% of the image width (about 13 pixels at 1080), deliberately quiet: on a phone, you zoom in to read it.

Photos shot on film

When you scan film, the EXIF describes the scan, not the shot. A camera scan carries the camera and lens you scanned with. A lab scan carries the lab's scanner model, or nothing at all. Add the camera, lens and exposure from the shoot yourself.

A film stock's name already includes its speed (the 400 in Kodak Portra 400). If you show the stock, leave out the ISO so the number does not appear twice. If you pushed the film, write it in the stock field, as in "Tri-X 400 @1600".

How to digitise film by photographing it with a camera is in the camera scanning setup guide.

Should you add a white border? Reasons for and against

There are three main reasons to add one.

The first is that photos of different ratios line up at the same size. Every image is the same size, so the feed and the grid both look consistent. Even where the grid crops, posts of one ratio are all cropped the same way.

The second is that tall photos go up uncropped. A 2:3 portrait is taller than 3:4, Instagram's tallest ratio, so posted as it is, it loses its top and bottom. While the limit was 4:5, even 3:4 phone photos were cropped. Inside a white border, the whole photo shows.

The third is that the border separates the photo from its surroundings. A full-bleed photo tends to run into the posts around it and the text on screen. With space around it, it reads as a piece on its own, like a framed print.

When to leave the border off

A white border does not suit a photo that should fill the screen for impact. Within an image of the same size, the border takes space away from the photo. A 3:2 landscape shows 1080 pixels wide with no border. With an 8% border, it shows 906 pixels wide.

If you post mostly landscapes, a thinner border keeps them from shrinking too much. If you only post 3:4 photos straight from your phone, they already share one ratio and are not cropped, so you do not need a border to match them up.

Bordered and borderless prints

When you order prints, "bordered" or "borderless" decides whether a white edge is left around the paper. A borderless print trims the edges of the image slightly so it fills the paper. The border in this guide is space you add to an image for the screen, which is a separate thing from that print setting.

What it takes to do by hand

With the tables, one image takes a few minutes. The work adds up when you keep dozens of photos on the same rules to keep the grid consistent.

  • Landscapes and portraits get different photo sizes and borders, so you re-enter the size and position for each photo
  • You read the EXIF of each photo, type the details in, and keep the style (f/2, 1/500s, brand names) and the text size and position consistent
  • For film, you type the camera, lens and stock into every photo
  • Every export, you check that the colour profile is there and the location is gone

Lining them up with Easel

Easel is a Mac app that puts a folder of photos with mixed ratios into the same bordered frame. It sets the camera, lens and exposure beneath each one as a small two-line caption. The 5%, 8% and 11% in this guide are Easel's S, M and L borders, and the 1:1.2 split is Easel's rule too.

Easel exports in two styles: Mat, the border on its own, and Gallery, which adds the shooting details. Both offer 4:5 and 1:1, with S, M or L borders. The paper comes in four colours: White, Paper (off-white), Ivory and Black.

  • No per-photo maths: drop in a folder and the photos are listed. Landscapes and portraits mixed together all export on the same rules
  • Details from EXIF: Gallery reads the camera, lens, focal length, aperture, shutter speed and ISO from EXIF and sets them in two lines. Switch off any item you do not want and the gap closes
  • Equipment presets for film: save the camera, lens, focal length and film stock as a preset and apply it to a whole roll. The preset replaces the scanning gear in the caption. Fix each frame's aperture and shutter speed by hand
  • Fixed type: the size, colour and position of the text are set, so every photo you export uses the same layout
  • Exports to new files: JPEGs 1080, 2160 or 4320 pixels wide. Your originals are never overwritten, and GPS is removed by default

Easel does not convert colour spaces; it embeds the original colour profile as it is. To post an Adobe RGB photo on Instagram, export it as sRGB first, from Lightroom or Photoshop for example, and bring that into Easel.

There are things Easel does not do.

  • There is no 3:4 ratio yet. In 4:5, a 2:3 portrait shows at 784×1176 pixels rather than 844×1266
  • You cannot change the size, colour or position of the text, so it is not for you if you want a bigger caption
  • It does not read RAW files. Bring in JPEG or HEIC files you have already processed

Easel runs on Apple silicon Macs with macOS 15 or later. You can try every feature free for 7 days. Pricing is on the product page.

More about Easel

All guides